For Better Performance Please Use Chrome or Firefox Web Browser

ISI Journal Papers

  1. S. Z. Sajadi, M. R. Salimpour, "Proposing a novel passive vascular self-cooling system", Journal of Thermal Analysis and Calorimetry, Accepted Manuscript, In Press.
  2. T. K. Ibrahim, A. T. Al-Sammarraie, M. S. M. Al-Jethelah, W. H. Al-Doori, M. R. Salimpour, H. Tao, "The impact of square shape perforations on the enhanced heat transfer from fins: experimental and numerical study", International Journal of Thermal Sciences, 149 (2020) 106144.
  3. M. R. Salimpour, M. H. K. Darvanjooghi, A. Abdollahi, A. Karimipour, M. Goodarzi, “Providing a model for Csf  according to pool boiling convection heat transfer of water/ferrous oxide nanofluid using sensitivity analysis”, International Journal of Numerical Methods for Heat and Fluid Flow, Accepted Manuscript, In Press.
  4. R. Dadsetani, M. R. Salimpour, M. R. Tavakoli, M. Goodarzi, E. P. B. Filho, "Thermal and mechanical design of reverting microchannels for cooling disk-shaped electronic parts using constructal theory", International Journal of Numerical Methods for Heat and Fluid Flow, 30 (1) (2020) 245-265.
  5. T. K. Ibrahim, A. T. Al-Sammarraie, W. H. Al-Taha, M. R. Salimpour, M. Al-Jethelah, A. N. Abdalla, H. Tao, "Experimental and numerical investigation of heat transfer augmentation in heat sinks using perforation technique", Applied Thermal Engineering 160 (2019) 113974.
  6. A. Ayoobi, A. F. Khorasani, M. R. Tavakoli, M. R. Salimpour, “Experimental study of the time period of continued heating rate on the pool boiling characteristics of saturated water”, International Journal of Heat and Mass Transfer, 137 (2019) 318-327.
  7. B. Nazari, M. R. Salimpour, S. Mahjoub, “Optimal mechanical and thermal architecture of high conductivity inserts for cooling an electronic piece”, Journal of Thermal Analysis and Calorimetry, 13 (2) (2019) 1499-1514.
  8. M. R. Salimpour, J. Darabi, S. Mahjoub, “Design and optimization of internal longitudinal fins of a tube using constructal theory”, Journal of Engineering Thermophysics, 28 (2) (2019) 239–254.
  9. A. T. Al-Sammarraie, M. Al-Jethelah, M. R. Salimpour, K. Vafai, "Nanofluids transport through a novel concave/convex convergent pipe", Numerical Heat Transfer, Part A: Applications, 75 (2) (2019) 91-109.
  10. M. R. Salimpour, A. Ahmadzadeh, A. T. Al-Sammarraie, "Comparative investigation on the exergoeconomic analysis of solar-driven ejector refrigeration systems", International Journal of Refrigeration, 99 (2019) 80–93.
  11. M. Ghorbani, M. R. Salimpour, K. Vafai, "Microchannel thermal performance optimization utilizing porous layer configurations", International Journal of Heat and Mass Transfer, 133 (2019) 62-72.
  12. M. Mardani, M. R. Salimpour, "Numerical optimization of an array of triangular microchannels using constructal theory", Journal of Applied Fluid Mechanics, 12 (2) (2019) 595-601.
  13. M. R. Salimpour, A. T. Al-Sammarraie, A. Forouzandeh, M. Farzaneh, "Constructal design of circular multilayer microchannel heat sinks", Journal of Thermal Science and Engineering Applications, Transactions of the ASME, 11 (2019) 011001.
  14. H. Arasteh, M. R. Salimpour, M. R. Tavakoli, "Optimal distribution of metal foam inserts in a double-pipe heat exchanger", International Journal of Numerical Methods for Heat and Fluid Flow, 29 (4) (2019) 1322-1342.
  15. M. R. Habibi, M. R. Salimpour, "Numerical study of nanofluid convective heat transfer in sinusoidal tubes", Heat Transfer Engineering, 40 (15) (2019) 1259-1267.
  16. E. Dehghani-Ashkezari, M. R. Salimpour, "Effect of groove geometry on pool boiling heat transfer of water-titanium oxide nanofluid", Heat and Mass Transfer, 54 (2018) 3473-3481.
  17. S. Mohammadshahi, M. Nili-Ahmadabadi, H. Samsam-Khayani, M. R. Salimpour, "Numerical study of a vortex-induced vibration technique for passive heat transfer enhancement in internal turbulent flow", European Journal of Mechanics / B Fluids, 72 (2018) 103–113.
  18. A. Torabi, S. Akbarzadeh, M. R. Salimpour, M. M. Khonsari, "On the running-in behavior of cam-follower mechanism", Tribology International, 118 (2018) 301-313.
  19. A. Fallahi, M. R. Salimpour, E. Shirani, "Analytical expressions for estimating endurance time and glove thermal resistance related to human finger in cold conditions", Journal of Thermal Biology, 69 (2017) 334-340.
  20. A. Ahmadzadeh, M. R. Salimpour, A. Sedaghat, "Thermal and exergoeconomic analysis of a novel solar driven combined power and ejector refrigeration (CPER) system", International Journal of Refrigeration, 83 (2017) 143-156.
  21. M. R. Salimpour, A. Abdollahi, M. Afrand, "An experimental study on deposited surfaces due to nanofluid pool boiling: comparison between rough and smooth surfaces", Experimental Thermal and Fluid Science, 88 (2017) 288-300.
  22. S. Baraty Beni, A. Bahrami, M. R. Salimpour, "Design of novel geometries for microchannel heat sinks used for cooling diode lasers", International Journal of Heat and Mass Transfer, 112 (2017) 689-698.
  23. A. Fallahi, M. R. Salimpour, E. Shirani, "A 3D thermal model to analyze the temperature changes of digits during cold stress and predict the danger of frostbite in human fingers", Journal of Thermal Biology, 65 (2017) 153–160.
  24. M. Kashcooli, M. R. Salimpour, E. Shirani, "Heat transfer analysis of skin during thermal therapy using thermal wave equation", Journal of Thermal Biology, 64 (2017) 7–18.
  25. A. Torabi, S. Akbarzadeh, M. R. Salimpour, "Comparison of tribological performance of roller follower and flat follower under mixed elastohydrodynamic lubrication regime", Proc. IMechE Part J: Journal of Engineering Tribology, 231 (8) (2017) 986-996.
  26. M. Mahmoudi, M. R. Tavakoli, M. A. Mirsoleimani, A. Gholami, M. R. Salimpour, "Experimental and numerical investigation on forced convection heat transfer and pressure drop in helically coiled pipes using TiO2/water nanofluid", International Journal of Refrigeration, 74 (2017) 625-641.
  27. M. R. Salimpour, A. Shahmoradi, D. Khoeini, "Experimental study of condensation heat transfer of R-404A in helically coiled tubes", International Journal of Refrigeration, 74 (2017) 582-589.
  28. M. R. Salimpour, R. Kalbasi, G. Lorenzini, "Constructal multi-scale structure of PCM-based heat sinks", Continuum Mechanics and Thermodynamics, 29 (2) (2017) 477-491.
  29. M. Farzaneh, M. R. Tavakoli, M. R. Salimpour, "Effect of reverting channels on heat transfer performance of microchannels with different geometries", Journal of Applied Fluid Mechanics, 10 (1) (2017) 41-53.
  30. N. Bahadormanesh, M. R. Salimpour, "Constructal design of high-emissivity radiation inserts embedded in a disk-shaped heat generation body", Applied Thermal Engineering, 112 (2017) 638–648.
  31. A. Abdollahi, M. R. Salimpour, N. Etesami, "Experimental analysis of magnetic field effect on the pool boiling heat transfer of a ferrofluid", Applied Thermal Engineering, 111 (2017) 1101–1110.
  32. S. Yarmohammadi, M. Farhadi, H. Hajimiri, M. R. Salimpour, "Multi-objective optimization of R-404A vapor condensation in swirling flow using genetic algorithms", Heat Transfer Engineering, 38 (2) (2017) 137-148.
  33. A. Abdollahi, M. R. Salimpour, " Experimental investigation of the boiling heat transfer of nanofluids on a flat plate in presence of magnetic field", The European Physical Journal Plus, 131 (11) (2016) 414.
  34. M. Farzaneh, M. R. Salimpour, M. R. Tavakoli, "Design of bifurcating microchannels with/without loops for cooling of square-shaped electronic components", Applied Thermal Engineering, 108 (2016) 581–595.
  35. M. Mardani, M. R. Salimpour, "Optimization of triangular microchannel heat sinks using constructal theory", Journal of Mechanical Science and Technology, 30 (10) (2016) 4757-4764.
  36. A. Shahsavar, M. Saghafian, M. R. Salimpour, M. B. Shafii, “Experimental investigation on laminar forced convection heat transfer of ferrofluid loaded with carbon nanotubes under constant and alternating magnetic fields", Experimental Thermal and Fluid Science, 76 (2016) 1-11.
  37. M. Monfared, E. Shirani, M. R. Salimpour, F. Aloui, "Numerical and experimental study on the flow history effects of axial flow on the Couette-Taylor flow", Acta Mechanica, 227 (7) (2016) 1999–2010.
  38. A. Shahsavar, M. Saghafian, M. R. Salimpour, M. B. Shafii, “Effect of temperature and concentration on thermal conductivity and viscosity of ferrofluid loaded with carbon nanotubes", Heat and Mass Transfer, 52 (10) (2016) 2293-2301.
  39. A. Shadlaghani, M. R. Tavakoli, M. Farzaneh, M. R. Salimpour, "Optimization of triangular fins with/without longitudinal perforate for thermal performance enhancement", Journal of Mechanical Science and Technology, 30 (4) (2016) 1903-1910.
  40. A. Torabi, S. Akbarzadeh, M. R. Salimpour, “Mixed thermo elastohydrodynamic lubrication analysis of finite length cam and follower mechanism”, Journal of Mechanical Science and Technology, 30 (3) (2016) 1295-1303.
  41. A. Shahsavar, M. R. Salimpour, M. Saghafian, M. B. Shafii, “Effect of magnetic field on thermal conductivity and viscosity of a magnetic nanofluid loaded with carbon nanotubes”, Journal of Mechanical Science and Technology, 30 (2) (2016) 809-815.
  42. R. Nasehi, A. Alamatsaz, M. R. Salimpour, “Using multi-shell phase change materials layers for cooling a lithium-ion battery”, Thermal Science, 20 (2) (2016) 391-403.
  43. A. Shahsavar, M. R. Salimpour, M. Saghafian, M. B. Shafii, “An experimental study on the effect of ultrasonication on thermal conductivity of ferrofluid loaded with carbon nanotubes”, Thermochimica Acta, 617 (2015) 102–110.
  44. R. Kalbasi, M. R. Salimpour, “Constructal design of horizontal fins to improve the performance of phase change material rectangular enclosures”, Applied Thermal Engineering, 91 (2015) 234-244.
  45. M. R. Salimpour, K. Golmohammadi, A. Sedaghat, A. Campo, “Experimental study of turbulent convective heat transfer of titanium oxide nanofluid flowing inside helically corrugated tubes”, Journal of Mechanical Science and Technology, 29 (9) (2015) 4011-4016.
  46. R. Kalbasi, M. R. Salimpour, “Constructal design of phase change material enclosures used for cooling electronic devices”, Applied Thermal Engineering, 84 (2015) 339-349.
  47. M. R. Salimpour, A. Menbari, "Analytical optimization of constructal channels used for cooling a ring shaped body based on minimum flow and thermal resistances", Energy, 81 (2015) 645-651.
  48. M. R. S. Bushehri, H. Ramin, M. R. Salimpour, "A new coupling method for slip-flow and conjugate heat transfer in a parallel plate micro heat sink", International Journal of Thermal Sciences, 89 (2015) 174-184.
  49. M. R. Salimpour, A. Dehshiri-Parizi, "Convective heat transfer of nanofluid flow through conduits with different cross sectional shapes", Journal of Mechanical Science and Technology, 29 (2) (2015) 707-713.
  50. M. Arbaban, M. R. Salimpour, "Enhancement of laminar natural convective heat transfer in concentric annuli with radial fins using nanofluids", Heat and Mass Transfer, 51 (2015) 353-362.
  51. M. S. Razavi, E. Shirani, M. R. Salimpour, G. S. Kassab, "Constructal law of vascular trees for facilitation of flow", PLoS ONE, 9 (12) (2014) e116260.
  52. M. Zare, M. Daneshi, E. Shirani, M. R. Salimpour, "A novel approach for prediction of 3-D skin structure burning with embedded branched vasculature", International Journal of Heat and Mass Transfer, 78 (2014) 468-480.
  53. M. R. Salimpour, A. Menbari, "Constructal design of cooling channels embedded in a ring-shaped heat generating body", Energy, 73 (2014) 302-310.
  54. S. Mahjoub, M. R. Salimpour, H. Shokouhmand, Z. Bahrami, “Entropy generation analysis in an evaporative air-cooled heat exchanger”, Journal of Thermal Science and Technology, 9 (1) (2014) jtst0004.
  55. M. S. Razavi, E. Shirani, M. R. Salimpour, “Development of a general method for obtaining the geometry of microfluidic networks”, AIP Advances, 4 (2014) 017109.
  56. H. Shokouhmand, S. Mahjoub, M. R. Salimpour, “Constructal design of finned tubes used in air-cooled heat exchangers”, Journal of Mechanical Science and Technology, 28 (6) (2014) 2385-2391.
  57. M. R. Salimpour, H. Gholami, “Effect of inserting coiled wires on pressure drop of R-404A condensation”, International Journal of Refrigeration, 40 (2014) 24-30.
  58. M. Zareh, H. Shokouhmand, M. R. Salimpour, M. Taeibi, “Numerical simulation and experimental analysis of refrigerants flow through adiabatic helical capillary tube”, International Journal of Refrigeration, 38 (2014) 299-309.
  59. M.R. Hajmohammadi, M.R. Salimpour, M. Saber, A. Campo, “Detailed analysis for the cooling performance enhancement of a heat source under a thick plate”, Energy Conversion and Management, 76 (2013) 691-700.
  60. A. Campo, M. R. Salimpour, J. Ho, “The  method  of  lines  with  numerical differentiation of  the temperature-time histories for a facile solution of 1-D inverse heat conduction problems”, Heat and Mass Transfer, 49 (2013) 369-379.
  61. M. Daneshi, M. Zare, M. R. Salimpour, “Micro and nano-scale conductive tree-structures for cooling a disk-shaped electronic piece”, Journal of Heat Transfer, Transactions of the ASME, 135 (2013) 031401.
  62. M. R. Salimpour, M. Sharifhasan, E. Shirani, "Constructal optimization of micro-channel heat sinks with non-circular cross-sections", Heat Transfer Engineering, 34 (10) (2013) 863-874.
  63. M. R. Salimpour, F. Sharifi, D. Menbari, “Constructal design for cooling a disc-shaped body using incomplete inserts with temperature-dependent thermal conductivities”, Proc. IMechE Part E: Journal of Process Mechanical Engineering, 227 (4) (2013) 231–242.
  64. M. R. Salimpour, S. Yarmohammadi, "Heat transfer enhancement during R-404a vapor condensation in swirling flow", International Journal of Refrigeration, 35 (7) (2012) 2014-2021.
  65. A. Mazloomi, F. Sharifi, M. R. Salimpour, A. Moosavi, "Optimization of highly conductive insert architecture for cooling a rectangular chip", International Communications in Heat and Mass Transfer, 39 (2012) 1265-1271.
  66. M. R. Hajmohammadi, E. Shirani, M. R. Salimpour, A. Campo, “Constructal placement of unequal heat sources on a plate cooled by laminar forced convection”, International Journal of Thermal Sciences, 60 (2012) 13-22.
  67. M. R. Salimpour, M. A. Zahedi, “Proposing a novel combined cycle for optimal exergy recovery of liquefied natural gas”, Heat and Mass Transfer, 48 (2012) 1309-1317.
  68. M. R. Salimpour, S. Yarmohammadi, “Effect of twisted tape inserts on pressure drop during R-404A condensation”, International Journal of Refrigeration, 35 (2) (2012) 263-269.
  69. H. Shokouhmand, F. Jam, M. R. Salimpour, “The effect of porous insert position on the enhanced heat transfer in partially filled channels”, International Communications in Heat and Mass Transfer, 38 (8) (2011) 1162-1167.
  70. H. Ghaedamini, M. R. Salimpour, A. Campo, “Constructal design of reverting microchannels for convective cooling of a circular disc”, International Journal of Thermal Sciences, 50 (6) (2011) 1051-1061.
  71. H. Ghaedamini, M. R. Salimpour, A. S. Mujumdar, “The effect of svelteness on the bifurcation angles role in pressure drop and flow uniformity of tree-shaped microchannels”, Applied Thermal Engineering 31 (5) (2011) 708-716.
  72. M. R. Salimpour, M. Sharifhasan, E. Shirani, “Constructal optimization of the geometry of an array of micro-channels”, International Communications in Heat and Mass Transfer 38 (1) (2011) 93-99.
  73. M. R. Salimpour, Z. Bahrami, “Thermodynamic analysis and optimization of air-cooled heat exchangers”, Heat and Mass Transfer, 47 (2011) 35-44.
  74. M. A. Akhavan-Behabadi, R. Kumar, M. R. Salimpour, R. Azimi, “Pressure drop and heat transfer augmentation due to coiled wire inserts during laminar flow of oil inside a horizontal tube“, International Journal of Thermal Sciences, 49 (2) (2010) 373–379.
  75. H. Shokouhmand, F. Jam, M. R. Salimpour, "Simulation of laminar flow and convective heat transfer in conduits filled with porous media using lattice Boltzmann method", International Communications in Heat and Mass Transfer, 36 (2009) 378-384.
  76. H. Shokouhmand, F. Jam, M. R. Salimpour, "Optimal porosity in an air heater conduit filled with a porous matrix", Heat Transfer Engineering, 30 (5) (2009) 375-382.
  77. M. R. Salimpour, "Heat transfer coefficients of shell and coiled tube heat exchangers", Experimental Thermal and Fluid Science, 33 (2) (2009) 203-207.
  78. M. A. Akhavan-Behabadi, M. R. Salimpour, V. A. Pazouki, "Pressure drop increase of forced convective condensation inside horizontal coiled wire inserted tubes", International Communications in Heat and Mass Transfer, 35 (9) (2008) 1220-1226.
  79. M. R. Salimpour, "Heat transfer characteristics of a temperature-dependent-property fluid in shell and coiled tube heat exchangers", International Communications in Heat and Mass Transfer, 35 (9) (2008) 1190-1195.
  80. H. Shokouhmand, M. R. Salimpour, M. A. Akavan-Behabadi, "Experimental investigation of shell and coiled tube heat exchangers using Wilson plots", International Communications in Heat and Mass Transfer, 35 (2008) 84-92.
  81. A. Feiz-Dizaji, M. R. Salimpour, F. Jam, "Flow field of a third-grade non-Newtonian fluid in the annulus of rotating concentric cylinders in the presence of magnetic field", Journal of Mathematical Analysis and Applications, 337 (2008) 632-645.
  82. H. Shokouhmand, M. R. Salimpour, "Entropy generation analysis of fully developed laminar forced convection in a helical tube with uniform wall temperature", Heat and Mass Transfer, 44 (2) (2007) 213-220.
  83. H. Shokouhmand, M. R. Salimpour, "Optimal Reynolds number of laminar forced convection in a helical tube subjected to uniform wall temperature", International Communications in Heat and Mass Transfer, 34 (2007) 753-761.
  84. M. A. Akavan-Behabadi, M. R. Salimpour, R. Kumar, K. N. Agrawal, "Augmentation of forced convection condensation heat transfer inside a horizontal tube using spiral spring inserts", Journal of Enhanced Heat Transfer, 12 (4) (2005) 373-384.

 

 

تحت نظارت وف ایرانی